Mic for media mod?
- Thread starter diega666
- Start date
R-Rated
Remember to Have Fun! - Solar Bear 2020 Champion
What type of helmet are you using? I am assuming a full face or modular - I had a great luck with Sony ECM-CS3 but after over 50k miles, I have switched to the Purple Panda.
I am not impressed with the stereo quality of the Panda but it does handle my Bane/Vader breathing better.
Both will require some tucking of the excess wire.
Last edited:
diega666
Wannabie Member
Ñ
Thanks for the inputs.
Yes, it's an Arai Xd4, full face.
I have a Boya tie clip mic but it has an insanely long cable. I found a mic from an old bt comm setup, I will get my soldering tip and try to improvise a solution.
My media mod will arrive on Monday. I will keep you posted.
Thanks for the inputs.
Yes, it's an Arai Xd4, full face.
I have a Boya tie clip mic but it has an insanely long cable. I found a mic from an old bt comm setup, I will get my soldering tip and try to improvise a solution.
My media mod will arrive on Monday. I will keep you posted.
Hippo-Drones
Pleb
I use this mic on my all my GoPro setups, it is cheap, it has a short lead that stays in place when you bend it and for me (in my opinion) gives great audio
It is also the same mic Shadetree Surgeon uses too!
Hama 57152| VOIP Notebook Mircophone | Black - Amazon.co.uk
Buy Hama 57152| VOIP Notebook Mircophone | Black
amzn.to
It is also the same mic Shadetree Surgeon uses too!
diega666
Wannabie Member
Thanks for the link.I use this mic on my all my GoPro setups, it is cheap, it has a short lead that stays in place when you bend it and for me (in my opinion) gives great audio
Hama 57152| VOIP Notebook Mircophone | Black - Amazon.co.uk
Buy Hama 57152| VOIP Notebook Mircophone | Blackamzn.to
It is also the same mic Shadetree Surgeon uses too!
I just bought a similar one, and it was Boya, not sure, if Boya is good, but all my mics are Boya. Had to buy a TRRS to TRS adapter in order to work with the media mod. I found a Rode one and it was twice the pe$o$ of the mic!
I just made a mounting tutorial right now, and tomorrow I will give it a test ride.
Thanks again for the help!
Hippo-Drones
Pleb
The mic I linked is a TRS so wouldn't need an adaptor to connect it to the Media ModThanks for the link.
I just bought a similar one, and it was Boya, not sure, if Boya is good, but all my mics are Boya. Had to buy a TRRS to TRS adapter in order to work with the media mod. I found a Rode one and it was twice the pe$o$ of the mic!
I just made a mounting tutorial right now, and tomorrow I will give it a test ride.
Thanks again for the help!
diega666
Wannabie Member
@HippoDrone
Yes, I see that.
It really helped me a lot anyways, to give me an idea of what I needed.The mic indeed was too short, by adding the adaptor, it reached the media mod perfectly.
The mic is a Boya BY-UM4 and the adapter is a Rode SC-3, in case someone was wondering.
Yes, I see that.
It really helped me a lot anyways, to give me an idea of what I needed.The mic indeed was too short, by adding the adaptor, it reached the media mod perfectly.
The mic is a Boya BY-UM4 and the adapter is a Rode SC-3, in case someone was wondering.
diega666
Wannabie Member
Well,
I'm back... Believe it or not, I've been working my ass very hard since two months.
After several trials that went wrong with the Boya mic and Rode adapter, finally I saw the light!
While I was tiding up my desk, I found a box with old parts from my Scala Rider G9, and guess what?, there was an unused cable mic and it's a TRS plug, I shaved a little of the rubber body to ensure a proper contact.
Took a ride and the sound was pretty decent in comparison of the previous setup, I think the adapter-mic setup introduced discharges and popping noises in the video.
Well, I hope to have better content in my channel in the near future.
I'm back... Believe it or not, I've been working my ass very hard since two months.
After several trials that went wrong with the Boya mic and Rode adapter, finally I saw the light!
While I was tiding up my desk, I found a box with old parts from my Scala Rider G9, and guess what?, there was an unused cable mic and it's a TRS plug, I shaved a little of the rubber body to ensure a proper contact.
Took a ride and the sound was pretty decent in comparison of the previous setup, I think the adapter-mic setup introduced discharges and popping noises in the video.
Well, I hope to have better content in my channel in the near future.
Meifesto
Semi-Suicidal Dutchie
That is good news
YBGuy
Yellow Backpack Guy
I'm all about that purple panda too.
ShadowRide
Wannabie Member
Agreed!
I'm using one with an open face helmet and it's doing good enough to suit me. Its the only mic I've had any good results with, Purple Panda included.
