Mic for media mod?

R-Rated

Remember to Have Fun! - Solar Bear 2020 Champion
Aug 4, 2016
4,230
4,750
113
Middle Tennessee USA
www.R-RatedCustoms.com
I ride a
2014 Harley Davidson (FLHTK) Ultra Limited
Hi there,
What mic without a 10ft cable would you recommend to use with a media mod mounted on helmet?
What type of helmet are you using? I am assuming a full face or modular - I had a great luck with Sony ECM-CS3 but after over 50k miles, I have switched to the Purple Panda.

I am not impressed with the stereo quality of the Panda but it does handle my Bane/Vader breathing better.

Both will require some tucking of the excess wire.
 
Last edited:
  • Like
Reactions: YBGuy and Drakhen99

Drakhen99

The Forrest Gump of Motovloggers
Aug 31, 2020
1,846
1,906
113
road-reality.com
I ride a
2019 Harley Street Glide Special, 2005 Kawasaki Vulcan 800 Classic (bobber), 1979 Kawasaki KZ650SR
Solution: Gaffer's Tape. I bundle my Purple Panda mic cable with gaffer's tape and then use another piece to stick it to the side of the helmet. It ain't too pretty but it works well.

-John
 
  • Love
Reactions: R-Rated

diega666

Wannabie Member
Feb 17, 2021
21
41
13
49
I ride a
BMW F650GS '06
Ñ
Thanks for the inputs.



Yes, it's an Arai Xd4, full face.

I have a Boya tie clip mic but it has an insanely long cable. I found a mic from an old bt comm setup, I will get my soldering tip and try to improvise a solution.
My media mod will arrive on Monday. I will keep you posted.
 
  • Like
Reactions: R-Rated

HippoDrone

Admin
Jan 2, 2017
7,776
7,111
113
West Sussex, UK
I ride a
1984 Honda CB100-N
2012 Moto Guzzi V7
2017 Suzuki GSX-R750
2020 Beta 390RR
2022 Aprilia Tuareg 660
I use this mic on my all my GoPro setups, it is cheap, it has a short lead that stays in place when you bend it and for me (in my opinion) gives great audio


It is also the same mic Shadetree Surgeon uses too! :)
 
  • Like
Reactions: diega666

diega666

Wannabie Member
Feb 17, 2021
21
41
13
49
I ride a
BMW F650GS '06
I use this mic on my all my GoPro setups, it is cheap, it has a short lead that stays in place when you bend it and for me (in my opinion) gives great audio


It is also the same mic Shadetree Surgeon uses too! :)
Thanks for the link.
I just bought a similar one, and it was Boya, not sure, if Boya is good, but all my mics are Boya. Had to buy a TRRS to TRS adapter in order to work with the media mod. I found a Rode one and it was twice the pe$o$ of the mic!:confused:
I just made a mounting tutorial right now, and tomorrow I will give it a test ride.
Thanks again for the help!
 

HippoDrone

Admin
Jan 2, 2017
7,776
7,111
113
West Sussex, UK
I ride a
1984 Honda CB100-N
2012 Moto Guzzi V7
2017 Suzuki GSX-R750
2020 Beta 390RR
2022 Aprilia Tuareg 660
Thanks for the link.
I just bought a similar one, and it was Boya, not sure, if Boya is good, but all my mics are Boya. Had to buy a TRRS to TRS adapter in order to work with the media mod. I found a Rode one and it was twice the pe$o$ of the mic!:confused:
I just made a mounting tutorial right now, and tomorrow I will give it a test ride.
Thanks again for the help!
The mic I linked is a TRS so wouldn't need an adaptor to connect it to the Media Mod
 

diega666

Wannabie Member
Feb 17, 2021
21
41
13
49
I ride a
BMW F650GS '06
@HippoDrone
Yes, I see that.
It really helped me a lot anyways, to give me an idea of what I needed.The mic indeed was too short, by adding the adaptor, it reached the media mod perfectly.
The mic is a Boya BY-UM4 and the adapter is a Rode SC-3, in case someone was wondering.
 

diega666

Wannabie Member
Feb 17, 2021
21
41
13
49
I ride a
BMW F650GS '06
Well,
I'm back... Believe it or not, I've been working my ass very hard since two months.
After several trials that went wrong with the Boya mic and Rode adapter, finally I saw the light!
While I was tiding up my desk, I found a box with old parts from my Scala Rider G9, and guess what?, there was an unused cable mic and it's a TRS plug, I shaved a little of the rubber body to ensure a proper contact.
Took a ride and the sound was pretty decent in comparison of the previous setup, I think the adapter-mic setup introduced discharges and popping noises in the video.
Well, I hope to have better content in my channel in the near future.
 

Meifesto

Semi-Suicidal Dutchie
Jan 5, 2013
1,802
1,608
113
The Netherlands
I ride a
Yamaha XT660R
Well,
I'm back... Believe it or not, I've been working my ass very hard since two months.
After several trials that went wrong with the Boya mic and Rode adapter, finally I saw the light!
While I was tiding up my desk, I found a box with old parts from my Scala Rider G9, and guess what?, there was an unused cable mic and it's a TRS plug, I shaved a little of the rubber body to ensure a proper contact.
Took a ride and the sound was pretty decent in comparison of the previous setup, I think the adapter-mic setup introduced discharges and popping noises in the video.
Well, I hope to have better content in my channel in the near future.
That is good news :)
 

YBGuy

Yellow Backpack Guy
Aug 14, 2020
621
663
93
San Francisco Bay Area
ybguy.com
I ride a
2005 RC51, and a 2004 Honda CBR1000RR
What type of helmet are you using? I am assuming a full face or modular - I had a great luck with Sony ECM-CS3 but after over 50k miles, I have switched to the Purple Panda.

I am not impressed with the stereo quality of the Panda but it does handle my Bane/Vader breathing better.

Both will require some tucking of the excess wire.
I'm all about that purple panda too.
 

dboi796

Wannabie Member
Mar 12, 2022
11
16
3
34
I ride a
ducati monster and gsxr 1000
Movo Acm400 these are so far the best for motovlog haven't have any problem so far.
 
  • Like
Reactions: Drakhen99

Winners Video

Website Supported by Ipswich SEO

Latest posts