Go Pro Mic Audio

[sil3ntr]

Ok folks, just did a quick test with the the Audio Technica ATR3350iS Onmidirectional Lavalier mic that just arrived. Noticed in premier pro and headphones that all my audio is in the right channel only ?

I am using what I think is a 10 pin (as advertised on ebay) USB mic adapter then into the single input on my mic.

Is it likely to be a fault or the wrong mic adapter ? can I split the right channel in post prod using adobe Premier pro ?

Thanks in advance, first time using a mic.

Cheers

 

[sil3ntr]

Just read this on the site for the mic:

• Dual-mono 1/8" output plug connects to a video camera, DSLR, or handheld audio recorder's stereo 1/8" input, to record audio on both left and right channels

I assume I may have to buy a digital audio recorder to make use of stereo.

.... As I type this worked out how to split the duel mono into stereo or more so duplicate the right channel to the left for now until I get a recorder.

 

[MIcruiser]

Its probably your mic adapter. I have the same mic and multiple adapters. The gopro brand one comes through in stereo, but one of my cheap right angle ones has a garbled left channel.

 

[sil3ntr]

Its probably your mic adapter. I have the same mic and multiple adapters. The gopro brand one comes through in stereo, but one of my cheap right angle ones has a garbled left channel.

Thanks for that, I thought that may have been the case. I split the audio in Premier for now. Ill get a recorder at some point and that should solve that problem.

Cheers

 

[Garthox]

In the interim you could duplicate the audio to both channels using an app such as audacity (still free as far as I know)